Shop replacement repair parts for Frigidaire Dryer model DG8600PW1

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.

Bearing cup for drum support ball

Flame sensor, radiant

Door strike

High temp adhesive

Air duct seal

Clip,top-to-front

Screw, pan head, 8-18b x 0.31

Door catch kit

Condenser coil cleaning brush

This is a genuine replacement part. Dryer Igniter 5303937186 Frigidaire igniter.

Bracket bearing support