Shop replacement repair parts for Amana Dryer model TEA600/P7575201W

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Screw, 10-24 3/8

Idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin.

Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.

Dryer door latch & catch kit

Door catch kit, includes catch and clip (metal) Replace both parts for best results

The Whirlpool Blower Wheel 56000 is a high-quality replacement part that attaches to the drive motor shaft and blows air through the drum and out through the exhaust vent. It replaces several part numbers and caution should be taken when servicing or repairing the appliance.

Igniter (Bracket is no longer included.) If your old igniter was round you will need to order the bracket in the related parts below.

Snap Retaining Ring

Thrust washer

Heating Element Assembly 240V

Front panel spring clip fastener

Screw, 8-18 x 1/2

Fine thread hex head screw

Idler pulley spring