Shop replacement repair parts for Montgomery Wards Dryer model LNC7433A/REV.A

Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates

Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.

Dryer lint filter (lint trap). Your lint filter should be replaced if it is torn or damaged in any way.

Door catch kit, includes catch and clip (metal) Replace both parts for best results

Heating element assembly with replacement high limit thermostat, L248-80 (240 Volt, 4750 Watt). Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

High limit thermostat, L248-80F

Door Seal - Dryer.

Idler pulley wheel

Timer. NOTE: Timers are often misdiagnosed. Visit our Repair Help section of the website for additional repair information.

Cycling thermostat, L146-25, 2 wire with extra terminal

Glide for main drum front support, left side

Glide for main drum front support, right side

Buzzer assy.

Door hinge

Knob And Skirt Assembly