Kenmore Washing Machine 110.23912100 Parts

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

Suspension Spring

Drive clutch kit

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

Washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.

Whirlpool's transmission is a genuine replacement part for washing machines that ensures optimal turning motion for the drum, resulting in the best wash possible for clothes.

Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.

Inner basket drive kit

Centerpost bearing and seal kit for direct drive washer. The brake removal tool is needed for easy removal of your original bearing. Please see related items below.

Brake lining kit

This is a Genuine Replacement Part. Whirlpool (WHIRA) 3352287 Motor, Main Drive.

Rubber bumper, lid switch strike

Center post bearing, upper. Special bearing tool for install no longer available from the manufacturer.