Shop replacement repair parts for Maytag Washing Machine model PAV5000AWW

Drive Belt

Washing machine drain pump assembly. This pump is driven by the main drive belt that also drives the transmission pulley. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.

Drive Motor with Pulley. 2 Speed 1/2HP 120Volts

Washing machine drain pump assembly. If the drain pump is clogged, damaged, or defective, the washer won't drain properly. This drain pump has been updated by the manufacturer. It no longer uses a mounting plate -- instead, the pump mounts directly to base of the washer.

Washing machine transmission pulley (or drive pulley). Includes pulley. thrust washer, and bearing kit. If the washer's bearing is worn out, the washer may spin slowly or may not spin at all.

Water valve, 60/40 cold & hot valve

Analog water temperature control board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.

Motor slide bearing

Water inlet valve

Bearing assembly (lower)

Hub seal and bearing kit

Spin bearing

Drive motor pivot washer/bearing

Tub seal and bearing kit

Replacement transmission and seal kit