GE Washing Machine WPRB9250C0CC Parts

Washing machine agitator assembly.

Tub Dampening Strap (set of 2)

The Genuine OEM GE Appliances Drive Belt WH1X2026 connects the drive motor to the washer's drive system to spin the basket. It is a high-quality, black, V-shaped belt that measures 29 1/2 inches by 1/2 inch. Disconnecting the appliance from all utilities is recommended before installation.

Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.

External hose drain

Tub bearing washer

Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.

Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.

This is a Genuine Replacement Part. General Electric (GENF0) WH16X543 Washing Machine Suspension Rod.

Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.

Hose from outer tub to the drain pump

Rod and spring assembly

The GE Appliances Water Inlet Valve controls water flow into the washer and is also known as the Water Inlet Valve Assembly. It is recommended to disconnect the appliance before installation.

Suspension rod support socket

The Fabric Softener Dispenser Cup by GE Appliances is a high-quality, genuine OEM part that holds fabric softener until it's dispensed into the water. It's located at the top of the agitator and should be installed with the appliance disconnected from all utilities.