Shop replacement repair parts for Montgomery Wards Dryer model LNC7835A80/REV.F

Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates

Dryer lint filter (lint trap). Your lint filter should be replaced if it is torn or damaged in any way.

Door catch kit, includes catch and clip (metal) Replace both parts for best results

Heating element assembly with replacement high limit thermostat, L248-80 (240 Volt, 4750 Watt). Dryer Heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Drum glide kit, right side. *Pad has adhesive backing

Front or rear felt seal for dryer drum

High limit thermostat, L248-80F

Front glide kit, (1) right (1) left glide (2) pads with adhesive backing. Instructions included.

Cycling thermostat, L146-25, 2 wire with extra terminal

Switch

Pushbutton

Idler arm & wheel assembly

Resistor assembly, timer

Buzzer assy.

Knob And Skirt Assembly