Shop replacement repair parts for Magic Chef Dryer model YE20CA2

Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

Gas line. 4' stainless gas dryer connector, (1) 3/8" and (1) 1/2" fitting, (1) extra 3/4" fitting, pipe thread sealant, leak test solution, and installation instructions.

Leveling Leg

Oven Thermostat


Rear seal

Fan belt

Thermostat kit

Door strike

Catch assembly

Door handle

Replacement spiral coil gas igniter

Drive motor kit with new start capacitor, pulley and hardware

Timer