Shop replacement repair parts for GE Profile Refrigerator model PSI23MGWB

Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.

The GE Defrost Heater and Bracket Assembly WR51X10055 is a high quality OEM part that melts frost from the evaporator fins during automatic defrost cycles. It is also known as the Refrigerator Glass Tube Defrost Heater and Bracket Assembly. Disconnected from all utilities prior to repair.

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WR17X10706 Refrigerator Dispenser Actuator

Water tank in refrigerator for chilled water dispenser

Refrigerator main control board assembly with installation instructions. This board also has the defrost controls built into it.

Refrigerator evaporator fan motor. If your motor has a white thermistor in the connector you need the related fan motor 914169. If it has a connector for a light you will need 1265886.

Evaporator fan blade

Two wire door switch for interior light

This dispenser door flap mounts in the ice dispenser.

Refrigerator solenoid assembly for dispenser door. If the dispenser door does not close properly frost will start to form in the dispenser area.

Water line quick connector. Connects two 5/16 lines

High limit thermostat for defrost heater. *Closed for continuity at room temperature.

Damper/dispenser door return spring

Drain tube

Condenser Fan Blade