Shop replacement repair parts for GE Refrigerator model TPJ24BIBCWW

Universal appliance light bulb, 40A15. 40 WATT 15 AMP standard base

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Light bulb socket

The GE Appliances Right Drawer Slide Rail supports the drawer as it slides in and out. It measures L:16 inches x W:2.125 x H:1.375 inches and is recommended to be installed with the appliance disconnected from all utilities.

The GE WR72X239 is a left-side Drawer Slide Rail for Refrigerators, replacing part number WR72X0239. It is important to reference the manufacturer or service manual before purchasing a replacement part.

Dual water inlet valve kit. New, quick connections. Cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove, depress ring that the tube slides into.

This clip on refrigerator defrost thermostat clips on to your refrigerator's evaporator and will cut out at 60 -Degree Fahrenheit and kick back in when the temperature drops to 32 -Degree Fahrenheit.

Screw

Fan Blade

The GE WR72X242 is a genuine OEM Drawer Slide Rail for Refrigerators, specifically for the right side. It replaces part number WR72X0242. It is important to reference the manufacturer or service manual before purchasing a replacement part.

Spring, door closure

Capacitor

Drawer rail slide assembly, left hand side

The GE Appliances Condenser Fan Motor WR60X225 cools hot refrigerant before it enters the evaporator. It is rated at 115VAC, 2W, 0.12A, and 60Hz with 1300 RPM and replaces several part numbers. Disconnect the appliance from all utilities prior to installation.