Price Match GuaranteeWhirlpool Dryer WED6400SB1 Parts
Shop replacement repair parts for Whirlpool Dryer model WED6400SB1
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
Dryer drum support roller. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.
Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
Dryer blower wheel. Used on 29 inch Whirlpool built models with lint filter on top. To remove the blower wheel, unscrew the blower wheel clockwise off the motor shaft.
Plastic leveling leg. White approximately 1" round x 1 3/4" long
Dryer heating element wire connector kit. Wire with spade terminal & wire nut
Motor pulley, 60 hertz
Dryer tri-ring retainer for drum support rollers.
Light Bulb 10 Watt small base
Dryer door catch. If the dryer door does not latch closed then the door strike or this catch is likely damaged
White Touch Up Paint
Screw, 10-24 x 1/2
Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.
Dryer blower housing foam seal with adhesive backing. 26 in
Dryer front panel retainer clip. 1 clip per pack.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic