Shop replacement repair parts for Maytag Washing Machine model MTW5640TQ2

Suspension Spring

Drive clutch kit

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

Direct-drive washer lid switch assembly, If the washing machine does not spin the lid switch may have failed.

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

Whirlpool's transmission is a genuine replacement part for washing machines that ensures optimal turning motion for the drum, resulting in the best wash possible for clothes.

Drive motor for direct drive washing machines & washer/cryer combo's

Water inlet valve and thermistor assembly. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.

Inner basket drive kit

Centerpost bearing and seal kit for direct drive washer. The brake removal tool is needed for easy removal of your original bearing. Please see related items below.

Spin tube bearing

Brake lining kit

Heavy duty drive motor to transmission coupling

Center post bearing, upper. Special bearing tool for install no longer available from the manufacturer.

Thrust ring, spin tube