Shop replacement repair parts for Electrolux Freezer model E32AF75FPS6

Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.

Evaporator (cooling coil) fan motor assembly with wire harness, 115 volts. *Per manufacturer screw holes in motor are not threaded from the factory, use old screws. See Related Items for self tapping screw. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area.

Handle mounting shoulder screw

Blade-condenser fan

Refrigerator or freezer water inlet valve. This water inlet valve supplies water to your refrigerator's ice and water dispenser. If the water dispenser or ice maker isn't working, the water inlet valve might be defective.

Freezer or fridge door gasket. If this gasket is worn out, cold air will leak out of the freezer, forcing the freezer to work harder to cool down. As a result, the freezer may run longer than normal, or frost may accumulate inside of the freezer. Measures 31" x 60"

Refrigerator/freezer defrost thermostat located on the evaporator coil

Set screw, handle

Complete add-on icemaker kit. Includes icemaker that makes 8 radius ice cubes, water valve, water line, ice bucket and hardware.

Plastic leveling leg

Door/light switch

Temperature sensing thermistor

Upper hinge

Defrost heater assembly

Condenser fan motor