Shop replacement repair parts for GE Dryer model DJXR433EG7WW

If your clothes dryer drum doesn't turn when the dryer is on, you likely need the Drive Belt WE03X29897, which is 89-1/2 inches long with four ribs. This genuine OEM replacement part is compatible with Whirlpool, Kenmore, GE, Hotpoint, and RCA dryers and washer/dryer combos.

Dryer drum slide. There are two of these needed on your dryer. These go on the outer most slots on the front bearing. Sold as pack of two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Dryer drum slide (2 pack). There are two of these needed on your dryer. These go on the inner most slots on the front bearing. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.

Rear drum bearing sleeve

Dryer drum seal for the lower front. If the seal is worn the drum glides are likely worn and may need to be replaced. See related items below.

Front bulkhead assembly with moisture sensor bars.

The GE Appliances Drum Bearing Kit WE25M40 is a high quality, Genuine OEM part that supports the rear of the dryer drum, ensuring smooth and quiet rotation. It is important to disconnect all utilities before installation.

6 Foot 30 Amp 3 wire dryer cord

Dryer lint filter. Keeping the filter clean is vital to dryer operation.

Dryer rotary start switch. If the start switch is defective, the dryer won't start. To determine if the start switch is defective, use a multimeter to test it for continuity.

High-limit thermostat for dryer. L315-65. If the dryer overheats, this high-limit thermostat will cut off the power to the drive motor. If the high-limit thermostat has blown, the dryer won't start.

Door switch

Control knob assembly in white. This knob is used on both washing machines and dryers. For models GTDP180ED and GTDX180ED, you will need to use part number WE01X20374 instead.

All purpose switch. Commonly used as dishwasher door switch, dryer door or broken belt switch, oven door latch switch and more

The Genuine OEM GE Appliances Cycling Thermostat regulates the internal temperature of the dryer and has limits of 210°F to 30°F. It is recommended to disconnect the appliance from all utilities prior to installation. Compatible with various GE models.