Shop replacement repair parts for GE Profile Refrigerator model PSSF3RGZBWW


Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.

Universal appliance light bulb, 40A15. 40 WATT 15 AMP standard base

Water tank in refrigerator for chilled water dispenser

Refrigerator main control board assembly with installation instructions. This board also has the defrost controls built into it.

Evaporator fan blade

Two wire door switch for interior light

This dispenser door flap mounts in the ice dispenser.

Evaporator fan motor with harness & thermistor

Water line quick connector. Connects two 5/16 lines

Refrigerator solenoid assembly for dispenser door. If the dispenser door does not close properly frost will start to form in the dispenser area.

Icemaker assembly
Transfer fill cup from the old ice maker to the new

Ice Bucket Auger WR29X43990 is a high-quality replacement part designed for GE, Hotpoint, RCA, and GE Profile refrigerators. Made from durable clear plastic and metal, this auger efficiently pulls and dispenses ice from the bin down the ice chute into your glass.

Refrigerator run capacitor 12 uF. If this run capacitor is defective, the refrigerator will not run.

Refrigerator condenser fan motor. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is defective, the refrigerator won’t cool properly.

Condenser fan blade