Kenmore Washing Machine 110.28222701 Parts

Suspension Spring

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

Whirlpool's transmission is a genuine replacement part for washing machines that ensures optimal turning motion for the drum, resulting in the best wash possible for clothes.

Water inlet valve and inlet assembly with thermistor for water temp sensing. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Washing machine main tub seal

Tub-to-pump hose kit with clamps

Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

5 Foot rubber fill hose for hot or cold water

Residential Washer Hoses- Fits most major washer brands. • Provides hot & cold water to the washer • (2) 4 Ft. hoses for hot & cold water • (4) Hose washers • Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Drain hose assembly, washing machine

Hose from tub to water level pressure switch

Centerpost bearing and seal kit for direct drive washer. The brake removal tool is needed for easy removal of your original bearing. Please see related items below.

Drain Hose Extension Kit. 3’ 6” Long with a goose neck oft 6”

Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Two 5 foot long rubber washing machine fill hoses with washers. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.