Price Match GuaranteeKitchenAid Washing Machine KHWV01RSS0 Parts
Shop replacement repair parts for KitchenAid Washing Machine model KHWV01RSS0
Washing machine door boot. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.
Washing machine water inlet valve. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.
Washing machine shock absorber. This shock absorber prevents the washer from vibrating by absorbing the movements of the washer tub.
Screw
Hose,outlet connector
Front clamp ring for door boot seal
If the original hose had an eco ball then you will need to discard the ball when installing this new style hose.
Hose clamp
Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.
Screw, 8-18 x 3/8
Rear clamp ring for door boot seal
Washing machine inner drain hose assembly.
Water inlet flowmeter
Baffle, basket
Washing machine drive belt. This part measures 48.22 inch long when uninstalled and will stretch to 51.53 inches when installed.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic