Shop replacement repair parts for Frigidaire Dryer model FSE747GC

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Door Catch

Bearing cup for drum support ball

Start switch, dryer, turn type

Door strike

Air duct seal

Frigidaire lint filter. This catches lint from your cloths during drying cycles

Main terminal block for power cord

Dryer Door Gasket

Screw, 10-16

Clip,top-to-front

Heating element coil

Condenser coil cleaning brush