Price Match GuaranteeMaytag Washing Machine MVWX550XW0 Parts
Shop replacement repair parts for Maytag Washing Machine model MVWX550XW0
Washing machine drain hose kit. Includes clamp. 4 feet long
Washing machine drain pump. If the washer does not drain then the drain pump may be clogged, damaged, or defective.
Drain pump outlet hose
Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Tub suspension rod kit
Residential Washer Hoses- Fits most major washer brands.
• Provides hot & cold water to the washer
• (2) 4 Ft. hoses for hot & cold water
• (4) Hose washers
• Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Washer COLD water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.
RC Item #907863
Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.
Hose from tub to water level pressure switch
Dispenser housing with hot & cold water inlet valves
Washer main tub seal. Located in the center of the outer tub at the transmission basket drive shaft. If the washing machine is leaking water from above the transmission this seal is likely damaged or worn out.
Washer HOT water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.
Package of two 6-foot-long Industrial Braid hoses with pre-installed washers and 90' ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Replacement transmission kit
Two 5 foot long rubber washing machine fill hoses with washers. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic