Price Match GuaranteeCrosley Dryer CDG9500W Parts
Shop replacement repair parts for Crosley Dryer model CDG9500W
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Dryer drum drive belt
RC Item #966673
Dryer drum support roller
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Thermal Fuse
This is a genuine replacement part. Whirlpool 33001621 Knob Skirt.
Screw, 10-24 3/8
Idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin.
RC Item #1378530
Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.
Drum drive motor
Light bulb, 7 Watt
Timer knob insert/cap
Dryer door latch & catch kit
Door catch kit, includes catch and clip (metal) Replace both parts for best results
Dryer heating element. If the dryer does not heat check for a blown thermal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic