Shop replacement repair parts for RCA Refrigerator model MRSC20KWBAAD

Universal appliance light bulb, 40A15. 40 WATT 15 AMP standard base

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Refrigerator light switch. This switch activates the refrigerator light when the door is open. It also prevents the dispenser from working if the door is open.

This dispenser door flap mounts in the ice dispenser.

Water line quick connector. Connects two 5/16 lines

Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.

Grommet cond fan

Light bulb socket

The GE WR9X489 is an OEM Defrost Timer for Refrigerators that manages the automatic defrost system in the freezer. It replaces several part numbers and it's important to reference the manufacturer or service manual before purchasing a replacement.

Refrigerator compressor kit. This part must be installed by a licensed repair technician.

Refrigerator defrost heater kit with thermostat for side by side models. If the freezer is cold, but the refrigerator is warm you could have a problem with the defrost system. If so, the defrost coils will be iced over and this heater kit may be defective.

Refrigerator or freezer door bottom hinge kit with both cam risers, mounting screw holes 1-1/8th inch apart

This back door closing cam is used on some GE manufactured refrigerators.

The GE WR17X2891 is a plastic tubing for refrigerators that supplies water to components like the ice maker and water dispenser. It has a 5/16 inch diameter

The GE Condenser Fan Motor WR60X187 is a high quality OEM part that moves air across the condenser coil. It has 3 round pin connection terminals and electrical specifications of 115V-60Hz and 0.14A. Disconnecting the appliance from utilities is recommended before installation.