Price Match GuaranteeMaytag Dryer MEDE900VW0 Parts
Shop replacement repair parts for Maytag Dryer model MEDE900VW0
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
Dryer thermistor. This thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit (21’ Celsius). If the thermistor is defective, it may prolong or shorten the drying time or cause a fault code. A defective thermistor is not responsible for a dryer not heating.
Dryer heating element. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.
Thermal cut out fuse and high limit thermostat kit
Drive motor kit - Note; the wiring connections may be different, comes with instructions
Hi-limit thermostat & thermistor assembly on heating element housing, L295-80F Thermistor should read around 50 to 60Kohms at room temperature.
Harness, sensor
RC Item #1471624
Harns-wire
Cntrl-elec
RC Item #1548486
Main wire harness with terminal block for power cord
Control board
RC Item #1471496
Harness, digital interface
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic