Price Match GuaranteeMaytag Dryer MGDX500XL0 Parts
Shop replacement repair parts for Maytag Dryer model MGDX500XL0
Dryer thermal fuse. Opens at approximately 196°F (91°C). *If open check for air flow issues like plugged exhaust vent or damaged blower wheel
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
The Whirlpool Burner Igniter Kit 279311 is a high-quality replacement part that ignites gas to light the dryer burner. It replaces multiple igniters and requires safety precautions and disconnection from utilities before installation.
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
Cycling thermostat, with internal-bias heater L155-25F
RC Item #1180872
Thermal cutoff
Thermostat, high-limit 255 f
Wire harness
RC Item #1175753
Replacement dryer gas valve & burner kit
Drive Motor
Electronic Control
Control board
RC Item #1874847
Harns-wire
RC Item #1873450
Harns-wire
Frequently Purchased Together For This Model
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic