Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Run Capacitor Replacement #65889-4
Whirlpool Refrigerator Run Capacitor Replacement #65889-4
Skill Level
Total Parts Cost
$54.24Estimated Savings
$112.5002:02
- Description
This video provides step-by-step instructions for replacing the run capacitor on Whirlpool refrigerators. The most common reason for replacing the run capacitor is when the compressor does not run properly or does not start and it proves to be at fault.
All of the information in this run capacitor replacement video is applicable to the following brands: Amana, Admiral, Maytag, Magic Chef, Whirlpool, Kenmore, Crosley, Jenn Air, Norge, KitchenAid
Tools used: 10 in 1 screwdriver, needle-nose pliers
All of the information in this run capacitor replacement video is applicable to the following brands: Amana, Admiral, Maytag, Magic Chef, Whirlpool, Kenmore, Crosley, Jenn Air, Norge, KitchenAid
Tools used: 10 in 1 screwdriver, needle-nose pliers
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the run capacitor in your refrigerator first remove the screw to release the water line from the rear access panel.
3
Next, remove the screws securing the rear panel.
4
Pull the panel down and out.
5
Use pliers to release the wire clip securing the run capacitor to the start device.
6
Now pull the old capacitor off.
7
Install the new run capacitor by aligning it on the mounting pin then insert the terminals into the start device.
8
Secure it with the wire clip.
9
Slide the rear access panel into the track and reinstall the screws to secure.
10
Reposition the water line and secure it with the screw.
11
You’re now ready to plug the power cord back in and confirm that the refrigerator is functioning properly.
Description
This video provides step-by-step instructions for replacing the run capacitor on Whirlpool refrigerators. The most common reason for replacing the run capacitor is when the compressor does not run properly or does not start and it proves to be at fault.
All of the information in this run capacitor replacement video is applicable to the following brands: Amana, Admiral, Maytag, Magic Chef, Whirlpool, Kenmore, Crosley, Jenn Air, Norge, KitchenAid
Tools used: 10 in 1 screwdriver, needle-nose pliers
All of the information in this run capacitor replacement video is applicable to the following brands: Amana, Admiral, Maytag, Magic Chef, Whirlpool, Kenmore, Crosley, Jenn Air, Norge, KitchenAid
Tools used: 10 in 1 screwdriver, needle-nose pliers
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the run capacitor in your refrigerator first remove the screw to release the water line from the rear access panel.
3
Next, remove the screws securing the rear panel.
4
Pull the panel down and out.
5
Use pliers to release the wire clip securing the run capacitor to the start device.
6
Now pull the old capacitor off.
7
Install the new run capacitor by aligning it on the mounting pin then insert the terminals into the start device.
8
Secure it with the wire clip.
9
Slide the rear access panel into the track and reinstall the screws to secure.
10
Reposition the water line and secure it with the screw.
11
You’re now ready to plug the power cord back in and confirm that the refrigerator is functioning properly.
Applicable Product Model
Parts Needed
Start Capacitor
$54.24
Total$0.00
Related Articles & Videos
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com