Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Start Device Replacement #2188831
Whirlpool Refrigerator Start Device Replacement #2188831
Skill Level
Total Parts Cost
$79.94Estimated Savings
$112.5002:16
- Description
This video provides step-by-step instructions for replacing the start device on Whirlpool refrigerators. The most common reason for replacing the start device is when the compressor clicks or simply does not run, preventing the fridge from cooling.
All of the information in this start device replacement video is applicable to the following brands: Kenmore, Whirlpool, Crosley, Maytag, KitchenAid, Inglis, Estate, Roper
Tools used: 10 in 1 screwdriver, needle-nose pliers
All of the information in this start device replacement video is applicable to the following brands: Kenmore, Whirlpool, Crosley, Maytag, KitchenAid, Inglis, Estate, Roper
Tools used: 10 in 1 screwdriver, needle-nose pliers
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the start device in your refrigerator first remove the screw to release the water line from the rear access panel.
3
Next, remove the screws securing the rear panel.
4
Pull the panel down and out.
5
Now use pliers to release both wire clips securing the run capacitor and start device to the compressor.
6
Pull the old start device off of the compressor.
7
Lift up the retaining clip and disconnect the wire connecter to fully release the start device.
8
You’re now ready to install the new start device.
9
Transfer the run capacitor from the old device to the new one.
10
Connect the wire connecter.
11
Align the start device on the compressor and push it into place.
12
Replace both wire clips.
13
Slide the rear access panel into the track and reinstall the screws to secure.
14
Reposition the water line and secure it with the screw.
15
You’re now ready to plug the power cord back in and confirm that the refrigerator is functioning properly.
Description
This video provides step-by-step instructions for replacing the start device on Whirlpool refrigerators. The most common reason for replacing the start device is when the compressor clicks or simply does not run, preventing the fridge from cooling.
All of the information in this start device replacement video is applicable to the following brands: Kenmore, Whirlpool, Crosley, Maytag, KitchenAid, Inglis, Estate, Roper
Tools used: 10 in 1 screwdriver, needle-nose pliers
All of the information in this start device replacement video is applicable to the following brands: Kenmore, Whirlpool, Crosley, Maytag, KitchenAid, Inglis, Estate, Roper
Tools used: 10 in 1 screwdriver, needle-nose pliers
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the start device in your refrigerator first remove the screw to release the water line from the rear access panel.
3
Next, remove the screws securing the rear panel.
4
Pull the panel down and out.
5
Now use pliers to release both wire clips securing the run capacitor and start device to the compressor.
6
Pull the old start device off of the compressor.
7
Lift up the retaining clip and disconnect the wire connecter to fully release the start device.
8
You’re now ready to install the new start device.
9
Transfer the run capacitor from the old device to the new one.
10
Connect the wire connecter.
11
Align the start device on the compressor and push it into place.
12
Replace both wire clips.
13
Slide the rear access panel into the track and reinstall the screws to secure.
14
Reposition the water line and secure it with the screw.
15
You’re now ready to plug the power cord back in and confirm that the refrigerator is functioning properly.
Applicable Product Model
Parts Needed
Start Device
$79.94
Total$0.00
Related Articles & Videos
05:14
How This Part Works
Refrigerator Compressor Start Device - How it Works & Installation Tips
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com