DescriptionThis video provides step-by-step repair instructions for replacing the freezer door switch on a Whirlpool refrigerator. The most common reasons for replacing the freezer door switch are when the ice and water dispenser doesn’t work or the freezer light won’t turn on.
All of the information for this freezer door switch replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Jenn Air, Crosley, Amana, Ikea
Tools needed: slotted screwdriver
Step-By-Step Instructions1
As with any repair, you should unplug the power cord before beginning.
2
To replace the freezer compartment door switch in your refrigerator first use a flathead screwdriver to help pry the old door switch out of the liner.
3
Note the orientation of the wires then disconnect them from the switch.
4
Install the new door switch by connecting the wires to the appropriate terminals.
5
Position the new switch on the liner and snap it into place.
6
You’re now ready to plug the power cord back in and confirm that the switch is working properly.