Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Ice Level Arm Replacement #2304354
Whirlpool Refrigerator Ice Level Arm Replacement #2304354
Skill Level
Total Parts Cost
$43.82Estimated Savings
$112.5001:25
- Description
This video provides step-by-step instructions for replacing the ice level arm on Whirlpool refrigerators. The most common reasons for replacing the ice level arm are when it is stuck in the up position, causing the ice maker to not make ice at all, and when it is disconnected or broken, causing the ice maker to still produce water even when the ice bucket is full.
All of the information in this ice level arm replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Jenn Air, Roper, Estate, Admiral, Crosley, Magic Chef
All of the information in this ice level arm replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Jenn Air, Roper, Estate, Admiral, Crosley, Magic Chef
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the ice level arm on your icemaker first remove the ice bucket.
3
Lift up the ice access door and pull the old ice level arm out of the icemaker assembly if still intact.
4
Install the new ice level arm by first inserting the back end of the arm into the fill cup then insert the front end into the control module housing.
5
With the new arm installed, close the ice access door and replace the ice bucket.
6
You’re now ready to plug the power cord back in and confirm that the new ice level arm is working properly.
Description
This video provides step-by-step instructions for replacing the ice level arm on Whirlpool refrigerators. The most common reasons for replacing the ice level arm are when it is stuck in the up position, causing the ice maker to not make ice at all, and when it is disconnected or broken, causing the ice maker to still produce water even when the ice bucket is full.
All of the information in this ice level arm replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Jenn Air, Roper, Estate, Admiral, Crosley, Magic Chef
All of the information in this ice level arm replacement video is applicable to the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Jenn Air, Roper, Estate, Admiral, Crosley, Magic Chef
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the ice level arm on your icemaker first remove the ice bucket.
3
Lift up the ice access door and pull the old ice level arm out of the icemaker assembly if still intact.
4
Install the new ice level arm by first inserting the back end of the arm into the fill cup then insert the front end into the control module housing.
5
With the new arm installed, close the ice access door and replace the ice bucket.
6
You’re now ready to plug the power cord back in and confirm that the new ice level arm is working properly.
Applicable Product Model
Parts Needed
Ice Level Arm
$43.82
Total$0.00
Related Articles & Videos
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com