Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Ice Bucket Auger Replacement W10422851
Whirlpool Refrigerator Ice Bucket Auger Replacement W10422851
Skill Level
Total Parts Cost
$122.96Estimated Savings
$112.5004:56
- Description
This video provides step-by-step repair instructions for replacing the ice bucket auger on a Whirlpool refrigerator. The most common reason for replacing the ice bucket auger is when the fridge ice dispenser is not working.
All of the information for this ice bucket auger replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Maytag, Crosley, Roper, Amana, Inglis, Ikea
Tools needed: needle-nose pliers, slotted screwdriver, channel locks, multi screwdriver
All of the information for this ice bucket auger replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Maytag, Crosley, Roper, Amana, Inglis, Ikea
Tools needed: needle-nose pliers, slotted screwdriver, channel locks, multi screwdriver
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the ice bucket auger first remove the ice bucket assembly from the freezer compartment and set it on a sturdy surface.
3
Release the actuator arm spring.
4
Remove the screw securing the actuator arm retainer.
5
Pull off the retainer and move the arm out of the way.
6
Now remove the screws securing the bucket to the auger housing.
7
Pull the bucket off.
8
Lift off the auger bearing and remove the auger assembly from the cover.
9
Use a flathead screwdriver to remove the e-clip securing the ice crusher assembly.
10
Remove the washer and pull the assembly out of the housing.
11
Now rotate the plastic nut clockwise to remove it from the auger shaft
12
Note the orientation of the blades and remove the blades and spacers from the shaft.
13
Remove the drum cover and slide off the drum and washer.
14
You’re now ready to install the new ice bucket auger.
15
Slide the new washer onto the auger shaft followed by the drum.
16
Replace the drum cover.
17
Making sure they are properly oriented, replace the blades and spacers.
18
Thread the plastic nut on counter-clockwise to secure.
19
Insert the assembly into the housing.
20
Slide on the washer and replace the e-clip to secure.
21
Confirm that the arm can properly actuate the door then replace the assembly in the cover.
22
Position the new bearing on the auger.
23
Reposition the ice bucket by aligning it on the auger and housing.
24
Replace the screws to secure.
25
Align the actuator arm with the bucket and reposition the retainer.
26
Replace the screw to secure.
27
With the retainer secured, rotate the spring counter-clockwise and insert it into the notch.
28
Return the ice bucket assembly to the freezer and slide it into position.
29
If you have trouble positioning the assembly you can rotate the auger to fully seat the drive coupler.
30
You’re now ready to plug the power cord back in and confirm that the ice auger is working properly.
Description
This video provides step-by-step repair instructions for replacing the ice bucket auger on a Whirlpool refrigerator. The most common reason for replacing the ice bucket auger is when the fridge ice dispenser is not working.
All of the information for this ice bucket auger replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Maytag, Crosley, Roper, Amana, Inglis, Ikea
Tools needed: needle-nose pliers, slotted screwdriver, channel locks, multi screwdriver
All of the information for this ice bucket auger replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Maytag, Crosley, Roper, Amana, Inglis, Ikea
Tools needed: needle-nose pliers, slotted screwdriver, channel locks, multi screwdriver
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the ice bucket auger first remove the ice bucket assembly from the freezer compartment and set it on a sturdy surface.
3
Release the actuator arm spring.
4
Remove the screw securing the actuator arm retainer.
5
Pull off the retainer and move the arm out of the way.
6
Now remove the screws securing the bucket to the auger housing.
7
Pull the bucket off.
8
Lift off the auger bearing and remove the auger assembly from the cover.
9
Use a flathead screwdriver to remove the e-clip securing the ice crusher assembly.
10
Remove the washer and pull the assembly out of the housing.
11
Now rotate the plastic nut clockwise to remove it from the auger shaft
12
Note the orientation of the blades and remove the blades and spacers from the shaft.
13
Remove the drum cover and slide off the drum and washer.
14
You’re now ready to install the new ice bucket auger.
15
Slide the new washer onto the auger shaft followed by the drum.
16
Replace the drum cover.
17
Making sure they are properly oriented, replace the blades and spacers.
18
Thread the plastic nut on counter-clockwise to secure.
19
Insert the assembly into the housing.
20
Slide on the washer and replace the e-clip to secure.
21
Confirm that the arm can properly actuate the door then replace the assembly in the cover.
22
Position the new bearing on the auger.
23
Reposition the ice bucket by aligning it on the auger and housing.
24
Replace the screws to secure.
25
Align the actuator arm with the bucket and reposition the retainer.
26
Replace the screw to secure.
27
With the retainer secured, rotate the spring counter-clockwise and insert it into the notch.
28
Return the ice bucket assembly to the freezer and slide it into position.
29
If you have trouble positioning the assembly you can rotate the auger to fully seat the drive coupler.
30
You’re now ready to plug the power cord back in and confirm that the ice auger is working properly.
Applicable Product Model
Parts Needed
Ice Bucket Auger
$122.96
Total$0.00
Related Articles & Videos
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com