DescriptionThis video provides step-by-step instructions for replacing the right front wheel assembly (or roller) on Whirlpool refrigerators. The most common reason for replacing the wheel is if it is damaged or worn, causing the fridge to not roll correctly.
All of the information in this wheel assembly replacement video is applicable to the following brands: Whirlpool, Kenmore, Maytag, KitchenAid, Crosley, Ikea, Inglis, Amana
Tools used: wood block, socket and extension, slotted screwdriver
Step-By-Step Instructions1
As with any repair, you should unplug the power cord before beginning to replace a front roller on your refrigerator.
2
First, remove the lower access panel.
3
Now, carefully lift up the front of the appliance and use a wood block or a comparable sturdy object to support it.
4
Remove the adjustment screw from the cabinet frame.
5
Use a flathead screwdriver to remove the retaining clip securing the mounting pin.
6
Pull out the mounting pin and lift out the old front roller assembly.
7
You're now ready to install the new front roller assembly, making sure the adjustment arm is properly seated.
8
Position the assembly in the frame and replace the mounting pin to hold it in place.
9
Snap on the retaining clip to secure the pin.
10
Now, lift the arm up and thread the adjustment screw into place.
11
Remove the support and gently lower the appliance to the floor.
12
Realign the lower access panel and snap it into place.
13
With the new roller installed, you're now ready to plug the power cord back in.