Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Refrigerator Ice Maker Not Working? #W10190935
Whirlpool Refrigerator Ice Maker Not Working? #W10190935
Skill Level
Total Parts Cost
$70.94Estimated Savings
$112.5002:03
- Description
This video provides step-by-step instructions for replacing the ice maker control module on Whirlpool refrigerators. The most common reason for replacing the control module is when the ice maker is not working properly but all of its other components prove not to be defective.
All of the information in this control module replacement video is applicable to the following brands: Kenmore, Whirlpool, KitchenAid, Amana, Maytag, Magic Chef, Crosley, Jenn Air, Admiral, Roper
Tools used: multi screwdriver
All of the information in this control module replacement video is applicable to the following brands: Kenmore, Whirlpool, KitchenAid, Amana, Maytag, Magic Chef, Crosley, Jenn Air, Admiral, Roper
Tools used: multi screwdriver
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the icemaker control module first remove the ice bucket.
3
Now, lift up the ice access door and pull off the icemaker cover.
4
Detach the ice level arm.
5
Uninstall the screws securing the control module to the housing.
6
Remove the old control module.
7
Install the new control module by aligning it with the housing then rotate the ice ejector bar until the module can be fully seated.
8
Secure the module with the screws.
9
Reattach the ice level arm.
10
Snap the cover onto the icemaker and close the ice access door.
11
Replace the ice bucket.
12
You’re now ready to plug the power cord back in and confirm that the icemaker is working properly.
Description
This video provides step-by-step instructions for replacing the ice maker control module on Whirlpool refrigerators. The most common reason for replacing the control module is when the ice maker is not working properly but all of its other components prove not to be defective.
All of the information in this control module replacement video is applicable to the following brands: Kenmore, Whirlpool, KitchenAid, Amana, Maytag, Magic Chef, Crosley, Jenn Air, Admiral, Roper
Tools used: multi screwdriver
All of the information in this control module replacement video is applicable to the following brands: Kenmore, Whirlpool, KitchenAid, Amana, Maytag, Magic Chef, Crosley, Jenn Air, Admiral, Roper
Tools used: multi screwdriver
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the icemaker control module first remove the ice bucket.
3
Now, lift up the ice access door and pull off the icemaker cover.
4
Detach the ice level arm.
5
Uninstall the screws securing the control module to the housing.
6
Remove the old control module.
7
Install the new control module by aligning it with the housing then rotate the ice ejector bar until the module can be fully seated.
8
Secure the module with the screws.
9
Reattach the ice level arm.
10
Snap the cover onto the icemaker and close the ice access door.
11
Replace the ice bucket.
12
You’re now ready to plug the power cord back in and confirm that the icemaker is working properly.
Applicable Product Model
Parts Needed
Icemaker Module
$70.94
Total$0.00
Related Articles & Videos
04:55
Part Replacement
Whirlpool Refrigerator Freezing Food? Temperature Control #2198202
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com