DescriptionThis video provides step-by-step repair instructions for replacing the spark plug on a Kohler small engine. The most common reasons for replacing the spark plug are when the small engine won’t start, stops after a few seconds, or runs poorly.
All of the information for this spark plug replacement video is applicable to the following brands:
Kohler
Tools needed: ratchet and socket
Step-By-Step Instructions1
Before you replace the spark plug first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug.
3
Use a socket or a spark plug wrench to help remove the old spark plug.
4
Install the new spark plug by threading it into the cylinder head.
5
Be careful not to over tighten.
6
Once secured, attach the wire and boot to the new spark plug and confirm that the engine runs properly.