Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Oven/Range Control Board Replacement #WB27K10356
GE Oven/Range Control Board Replacement #WB27K10356
Skill Level
Total Parts Cost
$98.22Estimated Savings
$112.5002:48
- Description
This video provides step-by-step instructions for replacing the oven control board on GE ranges. The most common reasons for replacing the oven control board are if the oven doesn’t bake or broil evenly, its fan keeps running, it won’t heat, won’t turn on, or won’t turn off, and simpler components of the circuit prove not to be at fault.
All of the information in this control board replacement video is applicable to the following brands: GE
Tools used: multi-screwdriver (T15 Torx), ratchet wrench with 1/4” socket for Torx bit T15
All of the information in this control board replacement video is applicable to the following brands: GE
Tools used: multi-screwdriver (T15 Torx), ratchet wrench with 1/4” socket for Torx bit T15
Step By Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven control board in your range first remove the screws on the front bottom of the control panel and loosen the screws on the back of the panel.
3
Now pull the bottom of the panel outward and lift the panel up to release.
4
Note the orientation of the wires attached to the control board then disconnect them from the board.
5
Next, remove the mounting screws securing the control board.
6
Lift the old control board out of the panel.
7
Prepare the new oven control board for installation by transferring the overlay from the old board to the new one or install a new overlay.
8
If installing a new overlay, be sure to peel off the protective plastic layer.
9
Now position the board in the control panel and replace the screws to secure.
10
Connect the wires to the appropriate terminals on the new board.
11
Align the screws on the top of the control panel with the slots in the support and push the panel into position.
12
Tighten the screws in the back and replace the screws on the front bottom of the panel.
13
You’re now ready to plug the power cord back in and confirm that the range is working properly.
Description
This video provides step-by-step instructions for replacing the oven control board on GE ranges. The most common reasons for replacing the oven control board are if the oven doesn’t bake or broil evenly, its fan keeps running, it won’t heat, won’t turn on, or won’t turn off, and simpler components of the circuit prove not to be at fault.
All of the information in this control board replacement video is applicable to the following brands: GE
Tools used: multi-screwdriver (T15 Torx), ratchet wrench with 1/4” socket for Torx bit T15
All of the information in this control board replacement video is applicable to the following brands: GE
Tools used: multi-screwdriver (T15 Torx), ratchet wrench with 1/4” socket for Torx bit T15
Step-By-Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven control board in your range first remove the screws on the front bottom of the control panel and loosen the screws on the back of the panel.
3
Now pull the bottom of the panel outward and lift the panel up to release.
4
Note the orientation of the wires attached to the control board then disconnect them from the board.
5
Next, remove the mounting screws securing the control board.
6
Lift the old control board out of the panel.
7
Prepare the new oven control board for installation by transferring the overlay from the old board to the new one or install a new overlay.
8
If installing a new overlay, be sure to peel off the protective plastic layer.
9
Now position the board in the control panel and replace the screws to secure.
10
Connect the wires to the appropriate terminals on the new board.
11
Align the screws on the top of the control panel with the slots in the support and push the panel into position.
12
Tighten the screws in the back and replace the screws on the front bottom of the panel.
13
You’re now ready to plug the power cord back in and confirm that the range is working properly.
Applicable Product Model
Parts Needed
Oven Control Board
$98.22
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com