Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Range/Oven Valve and Pressure Regulator #WB19K10044
GE Range/Oven Valve and Pressure Regulator #WB19K10044
Skill Level
Total Parts Cost
$115.58Estimated Savings
$112.5003:41
- Description
This video provides step-by-step instructions for replacing the oven valve and pressure regulator on GE ranges. The most common reason for replacing the oven valve and pressure regulator is when the oven won’t heat, but the valve and pressure regulator is almost never at fault.
All of the information in this valve and pressure regulator replacement video is applicable to the following brands: GE, Hotpoint, Kenmore
Tools used: multi-screwdriver, channel lock pliers, adjustable wrench
All of the information in this valve and pressure regulator replacement video is applicable to the following brands: GE, Hotpoint, Kenmore
Tools used: multi-screwdriver, channel lock pliers, adjustable wrench
Step By Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven valve and pressure regulator in your range first shut off the gas supply and disconnect the gas line from the regulator.
3
Now slide out the broiler drawer and set it aside.
4
Reach into the cabinet and remove the screw to release the oven valve shield.
5
Now use a 9/16th inch wrench to loosen the nut securing the burner gas supply tube and pull the tube out of the pressure regulator.
6
Disconnect the oven valve wires.
7
Next, remove the mounting screws securing the oven valve and pressure regulator assembly and pull the assembly out.
8
Prepare the new oven valve and pressure regulator for installation by first transferring the mounting brackets from the old assembly to the new one.
9
Now transfer the fitting from the old regulator to the new one.
10
Be sure to apply sealant to the threads before installing the fitting.
11
Install the assembly by inserting the orifice into the hole in the burner tube.
12
Align the brackets on the rear panel and replace the screws to secure.
13
Connect the wires to the new oven valve.
14
Connect the burner gas supply tube to the new regulator and tighten the nut to secure.
15
Realign the oven valve shield and secure it with the screw.
16
Replace the broiler drawer by aligning the rails on the drawer with the tracks on the base and sliding the drawer into position.
17
Connect the gas line to the regulator and turn the gas supply back on.
18
You’re now ready to plug the power cord back in and confirm that the range is working properly.
Description
This video provides step-by-step instructions for replacing the oven valve and pressure regulator on GE ranges. The most common reason for replacing the oven valve and pressure regulator is when the oven won’t heat, but the valve and pressure regulator is almost never at fault.
All of the information in this valve and pressure regulator replacement video is applicable to the following brands: GE, Hotpoint, Kenmore
Tools used: multi-screwdriver, channel lock pliers, adjustable wrench
All of the information in this valve and pressure regulator replacement video is applicable to the following brands: GE, Hotpoint, Kenmore
Tools used: multi-screwdriver, channel lock pliers, adjustable wrench
Step-By-Step Instructions
1
As with any appliance repair, you should unplug the power cord before beginning.
2
To replace the oven valve and pressure regulator in your range first shut off the gas supply and disconnect the gas line from the regulator.
3
Now slide out the broiler drawer and set it aside.
4
Reach into the cabinet and remove the screw to release the oven valve shield.
5
Now use a 9/16th inch wrench to loosen the nut securing the burner gas supply tube and pull the tube out of the pressure regulator.
6
Disconnect the oven valve wires.
7
Next, remove the mounting screws securing the oven valve and pressure regulator assembly and pull the assembly out.
8
Prepare the new oven valve and pressure regulator for installation by first transferring the mounting brackets from the old assembly to the new one.
9
Now transfer the fitting from the old regulator to the new one.
10
Be sure to apply sealant to the threads before installing the fitting.
11
Install the assembly by inserting the orifice into the hole in the burner tube.
12
Align the brackets on the rear panel and replace the screws to secure.
13
Connect the wires to the new oven valve.
14
Connect the burner gas supply tube to the new regulator and tighten the nut to secure.
15
Realign the oven valve shield and secure it with the screw.
16
Replace the broiler drawer by aligning the rails on the drawer with the tracks on the base and sliding the drawer into position.
17
Connect the gas line to the regulator and turn the gas supply back on.
18
You’re now ready to plug the power cord back in and confirm that the range is working properly.
Applicable Product Model
Parts Needed
Valve and Pressure Regulator
$115.58
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com