Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Replace Drain Hose Extension #3385556
Whirlpool Dishwasher Replace Drain Hose Extension #3385556
Skill Level
Total Parts Cost
$31.26Estimated Savings
$112.5005:11
- Description
This video provides step-by-step repair instructions for replacing the drain hose extension on a Whirlpool dishwasher. The most common reason for replacing the drain hose is when it is leaking.
All of the information for this drain hose extension replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
Tools needed: multi-screwdriver, pliers, adjustable wrench, channel lock pliers
All of the information for this drain hose extension replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
Tools needed: multi-screwdriver, pliers, adjustable wrench, channel lock pliers
Step By Step Instructions
1
To install an extended drain hose on your dishwasher, you will need to uninstall the appliance first.
2
To do this, turn off the power to your dishwasher
3
Shut off the water supply valve.
4
Next, rotate the lower access panel fasteners counter-clockwise to remove then pull out the access panel and sound dampening pad.
5
Loosen the nut to remove the water supply line from the inlet valve.
6
Be prepared for some water to spill out.
7
Now remove the screw to release the junction box cover.
8
Note the location of the wires then untwist the wire nuts to disconnect the wires.
9
Loosen the screw securing the grounding wire retainer and pull off the wire.
10
Use a flathead screwdriver to help remove the strain relief nut and detach the strain relief from the junction box.
11
Next, disconnect the drain hose from the sink or garbage disposer and feed it through the cabinet.
12
Open the dishwasher door and remove the mounting bracket screws.
13
To move the dishwasher, you may need to adjust the legs to lower the appliance.
14
Now, to avoid damage, very carefully pull the dishwasher away from the cabinet.
15
Use pliers to release the retaining clamp securing the old drain hose to the drain loop hose and pull the hose off.
16
Install the extended drain hose by connecting it to the drain loop hose and securing it with the retaining clamp.
17
Make sure the end of the new drain hose is accessible through the cabinet wall then gently slide the dishwasher back into the cabinet.
18
Adjust the leveling legs if necessary.
19
Replace the screws to secure the mounting brackets to the cabinet or countertop.
20
Feed the drain hose through the cabinet and connect it to the sink drain or garbage disposer.
21
Make sure the hose is elevated above the connection point.
22
Fully position the wire strain relief in the junction box and secure the strain relief nut.
23
Reposition the grounding wire and tighten the screw to secure the retainer.
24
Connect the wires using the wire nuts.
25
Align the cover plate and replace the screw to secure.
26
Attach the water supply line to the inlet port and tighten the nut to secure.
27
Reposition the lower access panel and sound dampening pad then secure the panel with the fasteners.
28
You’re now ready to turn the water supply back on as well as the power and confirm that the dishwasher is working properly.
Description
This video provides step-by-step repair instructions for replacing the drain hose extension on a Whirlpool dishwasher. The most common reason for replacing the drain hose is when it is leaking.
All of the information for this drain hose extension replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
Tools needed: multi-screwdriver, pliers, adjustable wrench, channel lock pliers
All of the information for this drain hose extension replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
Tools needed: multi-screwdriver, pliers, adjustable wrench, channel lock pliers
Step-By-Step Instructions
1
To install an extended drain hose on your dishwasher, you will need to uninstall the appliance first.
2
To do this, turn off the power to your dishwasher
3
Shut off the water supply valve.
4
Next, rotate the lower access panel fasteners counter-clockwise to remove then pull out the access panel and sound dampening pad.
5
Loosen the nut to remove the water supply line from the inlet valve.
6
Be prepared for some water to spill out.
7
Now remove the screw to release the junction box cover.
8
Note the location of the wires then untwist the wire nuts to disconnect the wires.
9
Loosen the screw securing the grounding wire retainer and pull off the wire.
10
Use a flathead screwdriver to help remove the strain relief nut and detach the strain relief from the junction box.
11
Next, disconnect the drain hose from the sink or garbage disposer and feed it through the cabinet.
12
Open the dishwasher door and remove the mounting bracket screws.
13
To move the dishwasher, you may need to adjust the legs to lower the appliance.
14
Now, to avoid damage, very carefully pull the dishwasher away from the cabinet.
15
Use pliers to release the retaining clamp securing the old drain hose to the drain loop hose and pull the hose off.
16
Install the extended drain hose by connecting it to the drain loop hose and securing it with the retaining clamp.
17
Make sure the end of the new drain hose is accessible through the cabinet wall then gently slide the dishwasher back into the cabinet.
18
Adjust the leveling legs if necessary.
19
Replace the screws to secure the mounting brackets to the cabinet or countertop.
20
Feed the drain hose through the cabinet and connect it to the sink drain or garbage disposer.
21
Make sure the hose is elevated above the connection point.
22
Fully position the wire strain relief in the junction box and secure the strain relief nut.
23
Reposition the grounding wire and tighten the screw to secure the retainer.
24
Connect the wires using the wire nuts.
25
Align the cover plate and replace the screw to secure.
26
Attach the water supply line to the inlet port and tighten the nut to secure.
27
Reposition the lower access panel and sound dampening pad then secure the panel with the fasteners.
28
You’re now ready to turn the water supply back on as well as the power and confirm that the dishwasher is working properly.
Applicable Product Model
Related Articles & Videos
02:01
Part Replacement
Whirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com