Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
Whirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
Skill Level
Total Parts Cost
$22.20Estimated Savings
$112.5002:01
- Description
This video provides step-by-step repair instructions for replacing the water supply line adapter on a Whirlpool dishwasher.
All of the information for this video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
All of the information for this video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
Step By Step Instructions
1
Before you replace the water supply adapter in your dishwasher…
2
…be sure to turn off the power to the appliance…
3
…and shut off the water supply valve.
4
Unthread the screws or detach the fasteners to release the dishwasher’s lower access panel or panels.
5
Use pliers to loosen the adapter fitting securing the water supply line to the inlet valve…
6
…then fully unthread – be prepared for some water to spill.
7
Now unthread the old adapter fitting from the water supply line.
8
Install the new water supply adapter fitting…
9
…by threading it into the water supply line.
10
Thread the adapter fitting onto the inlet valve port and tighten.
11
Reposition the lower access panel or panels…
12
…then rethread the screws or replace the fasteners to secure.
13
Turn the water supply back on…
14
…as well as the power…
15
…and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water supply line adapter on a Whirlpool dishwasher.
All of the information for this video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
All of the information for this video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Estate, Amana, Maytag, Inglis, Ikea, Roper, Magic Chef
Step-By-Step Instructions
1
Before you replace the water supply adapter in your dishwasher…
2
…be sure to turn off the power to the appliance…
3
…and shut off the water supply valve.
4
Unthread the screws or detach the fasteners to release the dishwasher’s lower access panel or panels.
5
Use pliers to loosen the adapter fitting securing the water supply line to the inlet valve…
6
…then fully unthread – be prepared for some water to spill.
7
Now unthread the old adapter fitting from the water supply line.
8
Install the new water supply adapter fitting…
9
…by threading it into the water supply line.
10
Thread the adapter fitting onto the inlet valve port and tighten.
11
Reposition the lower access panel or panels…
12
…then rethread the screws or replace the fasteners to secure.
13
Turn the water supply back on…
14
…as well as the power…
15
…and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com