Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Not Cleaning Dishes Properly? #W10327250
Whirlpool Dishwasher Not Cleaning Dishes Properly? #W10327250
Skill Level
Total Parts Cost
$56.33Estimated Savings
$112.5002:43
- Description
This video provides step-by-step repair instructions for replacing the water inlet valve on a Whirlpool dishwasher. The most common reasons for replacing the water inlet valve are when the dishwasher doesn’t clean, is leaking, makes noise, overflows, or won’t fill.
All of the information for this water inlet valve replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Ikea, Magic Chef, Inglis, Crosley, Roper
Tools needed: multi-screwdriver, pliers, channel lock pliers
All of the information for this water inlet valve replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Ikea, Magic Chef, Inglis, Crosley, Roper
Tools needed: multi-screwdriver, pliers, channel lock pliers
Step By Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning
2
Shut off the water supply valve.
3
To replace the water inlet valve, first rotate the lower access panel fasteners counter-clockwise to remove then pull out the access panel and sound dampening pad.
4
Next, unthread the fitting to remove the water supply line from the inlet valve.
5
Be prepared for some water to spill out.
6
Now disconnect the wire connecter from the valve.
7
Remove the mounting screw securing the valve to the frame and slide the valve out.
8
Use pliers to release the retaining clamp securing the fill hose to the valve and pull the hose off.
9
Install the new water inlet valve by first connecting the fill hose and securing it with the clamp.
10
Position the new valve in the frame and reinstall the screw to secure.
11
Connect the wire connecter to the new valve.
12
Attach the water supply line to the inlet port and tighten the fitting to secure.
13
Reposition the lower access panel and sound dampening pad then secure the panel with the fasteners.
14
You’re now ready to turn the water supply back on as well as the power and confirm that the dishwasher is working properly.
Description
This video provides step-by-step repair instructions for replacing the water inlet valve on a Whirlpool dishwasher. The most common reasons for replacing the water inlet valve are when the dishwasher doesn’t clean, is leaking, makes noise, overflows, or won’t fill.
All of the information for this water inlet valve replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Ikea, Magic Chef, Inglis, Crosley, Roper
Tools needed: multi-screwdriver, pliers, channel lock pliers
All of the information for this water inlet valve replacement video is applicable to the following brands:
Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Ikea, Magic Chef, Inglis, Crosley, Roper
Tools needed: multi-screwdriver, pliers, channel lock pliers
Step-By-Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning
2
Shut off the water supply valve.
3
To replace the water inlet valve, first rotate the lower access panel fasteners counter-clockwise to remove then pull out the access panel and sound dampening pad.
4
Next, unthread the fitting to remove the water supply line from the inlet valve.
5
Be prepared for some water to spill out.
6
Now disconnect the wire connecter from the valve.
7
Remove the mounting screw securing the valve to the frame and slide the valve out.
8
Use pliers to release the retaining clamp securing the fill hose to the valve and pull the hose off.
9
Install the new water inlet valve by first connecting the fill hose and securing it with the clamp.
10
Position the new valve in the frame and reinstall the screw to secure.
11
Connect the wire connecter to the new valve.
12
Attach the water supply line to the inlet port and tighten the fitting to secure.
13
Reposition the lower access panel and sound dampening pad then secure the panel with the fasteners.
14
You’re now ready to turn the water supply back on as well as the power and confirm that the dishwasher is working properly.
Applicable Product Model
Parts Needed
Water Inlet Valve
$56.33
Total$0.00
Related Articles & Videos
02:01
Part Replacement
Whirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com