Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Door Switch Replacement #W10274880
Whirlpool Dishwasher Door Switch Replacement #W10274880
Skill Level
Total Parts Cost
$50.56Estimated Savings
$112.5002:31
- Description
This video provides step-by-step instructions for replacing the door switch on Whirlpool dishwashers. The most common reason for replacing the door switch is when the dishwasher won’t start and continuity testing proves it is at fault.
All of the information in this door switch replacement video is applicable to the following brands: Whirlpool, Amana, Kenmore, Maytag, Magic Chef, Ikea, Crosley, Estate, Inglis
Tools used: multi-screwdriver, T-15 Torx bit, 3/16” socket
All of the information in this door switch replacement video is applicable to the following brands: Whirlpool, Amana, Kenmore, Maytag, Magic Chef, Ikea, Crosley, Estate, Inglis
Tools used: multi-screwdriver, T-15 Torx bit, 3/16” socket
Step By Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the door switch, your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
With the screws removed, pull the panel down then lift it up and out.
4
Next, remove the screws securing the control panel.
5
Pull the panel off.
6
Next, unhook the wires from the retaining clip and disconnect the wire connecter from the door switch.
7
Use a 3/16th inch socket to remove the screw securing the door switch and lift the old door switch out.
8
Install the new door switch by inserting it into the latch assembly.
9
Replace the screw to secure.
10
Connect the wire connecter to the new switch and secure the wires under the retaining clip.
11
Realign the control panel and replace the screws to secure.
12
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
13
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.
Description
This video provides step-by-step instructions for replacing the door switch on Whirlpool dishwashers. The most common reason for replacing the door switch is when the dishwasher won’t start and continuity testing proves it is at fault.
All of the information in this door switch replacement video is applicable to the following brands: Whirlpool, Amana, Kenmore, Maytag, Magic Chef, Ikea, Crosley, Estate, Inglis
Tools used: multi-screwdriver, T-15 Torx bit, 3/16” socket
All of the information in this door switch replacement video is applicable to the following brands: Whirlpool, Amana, Kenmore, Maytag, Magic Chef, Ikea, Crosley, Estate, Inglis
Tools used: multi-screwdriver, T-15 Torx bit, 3/16” socket
Step-By-Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the door switch, your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
With the screws removed, pull the panel down then lift it up and out.
4
Next, remove the screws securing the control panel.
5
Pull the panel off.
6
Next, unhook the wires from the retaining clip and disconnect the wire connecter from the door switch.
7
Use a 3/16th inch socket to remove the screw securing the door switch and lift the old door switch out.
8
Install the new door switch by inserting it into the latch assembly.
9
Replace the screw to secure.
10
Connect the wire connecter to the new switch and secure the wires under the retaining clip.
11
Realign the control panel and replace the screws to secure.
12
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
13
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.
Applicable Product Model
Related Articles & Videos
02:01
Part Replacement
Whirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com