Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Replace Float Switch Housing #W10316267
Whirlpool Dishwasher Replace Float Switch Housing #W10316267
Skill Level
Total Parts Cost
$19.67Estimated Savings
$112.5003:03
- Description
This video provides step-by-step instructions for replacing the overfill and float switch housing on Whirlpool dishwashers. The most common reason for replacing the housing is if it is worn or broken, preventing the float assembly from actuating the float switch.
All of the information in this switch housing replacement video is applicable to the following brands: Whirlpool, Kenmore, Amana, Ikea, Maytag, Inglis
Tools used: multi-screwdriver
All of the information in this switch housing replacement video is applicable to the following brands: Whirlpool, Kenmore, Amana, Ikea, Maytag, Inglis
Tools used: multi-screwdriver
Step By Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To make it easier to access the float switch housing, we recommend removing the outer door panel.
3
To do this, remove the screws from inside the door which secure the outer panel.
4
With the screws removed, pull the panel down then lift it up and out.
5
Now rotate the lower access panel fasteners counter-clockwise to remove then pull out the access panel and sound dampening pad.
6
Next, open the two float switch housing covers.
7
Disconnect the wire connecter from the switch and pull off the actuator.
8
Now push the float stem to the right to detach it from the housing.
9
Remove the screw securing the housing to the tank and pull out the old housing.
10
Prepare the new float switch housing for installation by transferring the float switch from the old housing to the new one.
11
Now align the housing on the tank and replace the screw to secure.
12
Open the dishwasher door and push the float down to realign the float stem in the housing.
13
Reposition the actuator.
14
Reconnect the wire connecter to the switch and snap the housing covers shut.
15
Reposition the lower access panel and sound dampening pad then secure the panel with the fasteners.
16
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
17
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.
Description
This video provides step-by-step instructions for replacing the overfill and float switch housing on Whirlpool dishwashers. The most common reason for replacing the housing is if it is worn or broken, preventing the float assembly from actuating the float switch.
All of the information in this switch housing replacement video is applicable to the following brands: Whirlpool, Kenmore, Amana, Ikea, Maytag, Inglis
Tools used: multi-screwdriver
All of the information in this switch housing replacement video is applicable to the following brands: Whirlpool, Kenmore, Amana, Ikea, Maytag, Inglis
Tools used: multi-screwdriver
Step-By-Step Instructions
1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To make it easier to access the float switch housing, we recommend removing the outer door panel.
3
To do this, remove the screws from inside the door which secure the outer panel.
4
With the screws removed, pull the panel down then lift it up and out.
5
Now rotate the lower access panel fasteners counter-clockwise to remove then pull out the access panel and sound dampening pad.
6
Next, open the two float switch housing covers.
7
Disconnect the wire connecter from the switch and pull off the actuator.
8
Now push the float stem to the right to detach it from the housing.
9
Remove the screw securing the housing to the tank and pull out the old housing.
10
Prepare the new float switch housing for installation by transferring the float switch from the old housing to the new one.
11
Now align the housing on the tank and replace the screw to secure.
12
Open the dishwasher door and push the float down to realign the float stem in the housing.
13
Reposition the actuator.
14
Reconnect the wire connecter to the switch and snap the housing covers shut.
15
Reposition the lower access panel and sound dampening pad then secure the panel with the fasteners.
16
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
17
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.
Applicable Product Model
Related Articles & Videos
02:01
Part Replacement
Whirlpool Dishwasher Water Supply Line Adapter Replacement (W10685193)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com