DescriptionThis video provides step-by-step instructions for replacing the detergent dispenser on Whirlpool dishwashers. The most common reason for replacing the detergent dispenser is if it doesn’t work and the problem is with the dispenser rather than the release mechanism.
All of the information in this detergent dispenser replacement video is applicable to the following brands: Whirlpool, Maytag
Tools used: multi-screwdriver, 3/16” socket
Step-By-Step Instructions1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the dispenser, your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
With the screws removed, pull the panel down then lift it up and out.
4
Next, pull the tab back to disconnect the wire connecter from the dispenser.
5
Use a 3/16th inch socket to remove the screws securing the dispenser bracket.
6
Remove the bracket and shields.
7
Release the tabs and pull the old dispenser out.
8
Install the new dispenser by aligning it in the inner door panel and snapping it into position.
10
Realign the bracket and reinstall the screws to secure.
11
Connect the wire connecter to the new dispenser.
12
Reinstall the outer door panel by first aligning it on the door hinges then slide the panel up and reinstall the screws in the inner panel to secure.
13
You’re now ready to restore power to the dishwasher and confirm that it’s working properly.