Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Heating Element Replacement #8061706
Asko Washer Heating Element Replacement #8061706
Skill Level
Total Parts Cost
$57.95Estimated Savings
$112.5003:04
- Description
This video provides step-by-step repair instructions for replacing the heating element on an Asko washing machine. The most common reason for replacing the heating element is when the washer isn’t heating the water.
All of the information for this heating element replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 10mm socket and wrench, flat head screwdriver
All of the information for this heating element replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 10mm socket and wrench, flat head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the heating element in your washer, first pull the hoses free of the retainers on the rear panel, if applicable.
3
Now use a t-20 torx bit to remove the screws securing the panel.
4
Pull the panel off.
5
Next, remove the screws securing the support bracket and pull the bracket off.
6
Now disconnect the heating element wires and the grounding wire.
7
Use a 10mm deep-well socket to loosen the mounting nut.
8
With the nut near the end of the bolt, push the bolt in.
9
Now use a flathead screwdriver to help pry the old heating element out of the tub.
10
Prepare the new heating element for installation by loosening the nut so it rests near the end of the bolt then push the bolt in.
11
Now insert the element into the slot in the tub.
12
Push it into position and tighten the nut to secure.
13
Connect all three wires to the new heating element.
14
Reposition the support bracket. and replace the screws to secure.
15
Replace the rear pane l by inserting the tabs into the slots in the cabinet frame.
16
Secure the panel with the screws.
17
Secure the hoses in the rear panel retainers.
18
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step repair instructions for replacing the heating element on an Asko washing machine. The most common reason for replacing the heating element is when the washer isn’t heating the water.
All of the information for this heating element replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 10mm socket and wrench, flat head screwdriver
All of the information for this heating element replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 10mm socket and wrench, flat head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the heating element in your washer, first pull the hoses free of the retainers on the rear panel, if applicable.
3
Now use a t-20 torx bit to remove the screws securing the panel.
4
Pull the panel off.
5
Next, remove the screws securing the support bracket and pull the bracket off.
6
Now disconnect the heating element wires and the grounding wire.
7
Use a 10mm deep-well socket to loosen the mounting nut.
8
With the nut near the end of the bolt, push the bolt in.
9
Now use a flathead screwdriver to help pry the old heating element out of the tub.
10
Prepare the new heating element for installation by loosening the nut so it rests near the end of the bolt then push the bolt in.
11
Now insert the element into the slot in the tub.
12
Push it into position and tighten the nut to secure.
13
Connect all three wires to the new heating element.
14
Reposition the support bracket. and replace the screws to secure.
15
Replace the rear pane l by inserting the tabs into the slots in the cabinet frame.
16
Secure the panel with the screws.
17
Secure the hoses in the rear panel retainers.
18
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com