Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washing Machine Pump Access Door Replacement #8061657-0
Asko Washing Machine Pump Access Door Replacement #8061657-0
Skill Level
Total Parts Cost
$22.55Estimated Savings
$112.5001:14
- Description
This video provides step-by-step instructions for replacing the pump access door on Asko washing machines. The most common reason for replacing the pump access door is when its plug is at all damaged or worn, which could cause the drain tube to fall off and leak water onto the floor.
All of the information in this access door replacement video is applicable to the following brands: Asko
Tools used: flat-head screwdriver, tape
All of the information in this access door replacement video is applicable to the following brands: Asko
Tools used: flat-head screwdriver, tape
Step By Step Instructions
1
To replace the pump access door on your washer first use a flathead screwdriver to open the door.
2
Pull off the drain tube from the door and drain the excess water.
3
Use tape to protect the surface of the front panel then use the screwdriver to help detach the top pin to remove the old door.
4
Install the new pump access door by inserting the bottom pin into the hole in the front panel then use the screwdriver to help snap the top pin into place.
5
Remove the tape, connect the drain tube to the new door and snap the door shut.
Description
This video provides step-by-step instructions for replacing the pump access door on Asko washing machines. The most common reason for replacing the pump access door is when its plug is at all damaged or worn, which could cause the drain tube to fall off and leak water onto the floor.
All of the information in this access door replacement video is applicable to the following brands: Asko
Tools used: flat-head screwdriver, tape
All of the information in this access door replacement video is applicable to the following brands: Asko
Tools used: flat-head screwdriver, tape
Step-By-Step Instructions
1
To replace the pump access door on your washer first use a flathead screwdriver to open the door.
2
Pull off the drain tube from the door and drain the excess water.
3
Use tape to protect the surface of the front panel then use the screwdriver to help detach the top pin to remove the old door.
4
Install the new pump access door by inserting the bottom pin into the hole in the front panel then use the screwdriver to help snap the top pin into place.
5
Remove the tape, connect the drain tube to the new door and snap the door shut.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com