Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Drain Hose Replacement #8061998
Asko Washer Drain Hose Replacement #8061998
Skill Level
Total Parts Cost
$49.29Estimated Savings
$112.5004:11
- Description
This video provides step-by-step repair instructions for replacing the drain hose on an Asko washing machine. The most common reason for replacing the drain hose is when it is leaking water.
All of the information for this drain hose replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, pinch clamp pliers, flat head screwdriver
All of the information for this drain hose replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, pinch clamp pliers, flat head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the drain hose on your washer first use a flathead screwdriver to open the pump access door.
3
Pull the drain tube off of the door and drain any excess water.
4
Once drained, reattach the tube to the access door and snap the door shut.
5
Next, pull the hoses free of the retainers on the rear panel, if applicable
6
Now use a t-20 torx bit to remove the screws securing the panel.
7
Pull the panel off.
8
Now remove the screws at the back securing the top panel.
9
Pull the panel back and lift it up to remove.
10
Reach into the cabinet and remove the hose from the drain pump assembly.
11
You may need to use pliers to break the pinch clamp to do this.
12
Use a flathead screwdriver to pry the hoses retainers from the frame and remove the retainers from the hose.
13
Detach the hose grommet from the frame.
14
Remove the goose-neck bracket from the end of the old drain hose.
15
You can now pull the old hose out of the frame.
16
Install the new drain hose by inserting the straight end through the hole in the frame.
17
Push the grommet into place.
18
Slide a new clamp over the opposite end of the hose.
19
Attach the hose to the drain pump assembly and use the clamp to secure it.
20
Snap the retainers onto the new hose where marked and snap them into the cabinet frame.
21
Attach the goose-neck bracket to the end of the hose.
22
Make sure the support rail is properly positioned.
23
Now slide the front edge of the top panel under the control panel.
24
Align the panel with the support rail and the pins on the frame then push down.
25
Replace the rear panel by inserting the tabs into the slots in the cabinet frame.
26
Secure the panel with the screws.
27
Secure the hoses in the rear panel retainers.
28
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step repair instructions for replacing the drain hose on an Asko washing machine. The most common reason for replacing the drain hose is when it is leaking water.
All of the information for this drain hose replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, pinch clamp pliers, flat head screwdriver
All of the information for this drain hose replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, pinch clamp pliers, flat head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the drain hose on your washer first use a flathead screwdriver to open the pump access door.
3
Pull the drain tube off of the door and drain any excess water.
4
Once drained, reattach the tube to the access door and snap the door shut.
5
Next, pull the hoses free of the retainers on the rear panel, if applicable
6
Now use a t-20 torx bit to remove the screws securing the panel.
7
Pull the panel off.
8
Now remove the screws at the back securing the top panel.
9
Pull the panel back and lift it up to remove.
10
Reach into the cabinet and remove the hose from the drain pump assembly.
11
You may need to use pliers to break the pinch clamp to do this.
12
Use a flathead screwdriver to pry the hoses retainers from the frame and remove the retainers from the hose.
13
Detach the hose grommet from the frame.
14
Remove the goose-neck bracket from the end of the old drain hose.
15
You can now pull the old hose out of the frame.
16
Install the new drain hose by inserting the straight end through the hole in the frame.
17
Push the grommet into place.
18
Slide a new clamp over the opposite end of the hose.
19
Attach the hose to the drain pump assembly and use the clamp to secure it.
20
Snap the retainers onto the new hose where marked and snap them into the cabinet frame.
21
Attach the goose-neck bracket to the end of the hose.
22
Make sure the support rail is properly positioned.
23
Now slide the front edge of the top panel under the control panel.
24
Align the panel with the support rail and the pins on the frame then push down.
25
Replace the rear panel by inserting the tabs into the slots in the cabinet frame.
26
Secure the panel with the screws.
27
Secure the hoses in the rear panel retainers.
28
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com