Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Noise Filter Replacement #8076202
Asko Washer Noise Filter Replacement #8076202
Skill Level
Total Parts Cost
$71.27Estimated Savings
$112.5002:12
- Description
This video provides step-by-step repair instructions for replacing the noise filter on an Asko washing machine. The most common reason for replacing the noise filter is when it blows during a power surge.
All of the information for this noise filter replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 13mm wrench
All of the information for this noise filter replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 13mm wrench
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the noise filter in your washer, first use a t-20 torx bit to remove the screws at the back securing the top panel.
3
Now pull the panel back and lift it up to remove.
4
Use a 13mm wrench to remove the nut securing the noise filter to the frame.
5
Pull the old filter out of the frame, note the orientation of the wires then disconnect them.
6
Install the new noise filter by first connecting the wires to the appropriate terminals.
7
Insert the new filter into the frame then thread and tighten the nut to secure.
8
Make sure the support rail is in place.
9
Now slide the front edge of the top panel under the control panel.
10
Align the panel with the support rail and the pins on the frame then push down.
11
Replace the screws in the back.
12
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step repair instructions for replacing the noise filter on an Asko washing machine. The most common reason for replacing the noise filter is when it blows during a power surge.
All of the information for this noise filter replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 13mm wrench
All of the information for this noise filter replacement video is applicable to the following brands:
Asko
Tools needed: multi-screwdriver, T20 Torx bit, 13mm wrench
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the noise filter in your washer, first use a t-20 torx bit to remove the screws at the back securing the top panel.
3
Now pull the panel back and lift it up to remove.
4
Use a 13mm wrench to remove the nut securing the noise filter to the frame.
5
Pull the old filter out of the frame, note the orientation of the wires then disconnect them.
6
Install the new noise filter by first connecting the wires to the appropriate terminals.
7
Insert the new filter into the frame then thread and tighten the nut to secure.
8
Make sure the support rail is in place.
9
Now slide the front edge of the top panel under the control panel.
10
Align the panel with the support rail and the pins on the frame then push down.
11
Replace the screws in the back.
12
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com