Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Drive Belt Replacement #8081649
Asko Washer Drive Belt Replacement #8081649
Skill Level
Total Parts Cost
$33.10Estimated Savings
$112.5002:01
- Description
This video provides step-by-step instructions for replacing the drive belt on Asko washing machines. The most common reason for replacing the belt is when it is broken or not tight on the pulley, causing the washer to not spin or agitate or to make a loud noise whenever the motor is running.
All of the information in this drive belt replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
All of the information in this drive belt replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the drive belt in your washer, first pull the hoses free of the retainers on the rear panel if applicable.
3
Now use a t-20 torx bit to remove the screws securing the panel.
4
Pull the panel off.
5
Rotate the drive pulley as you pull off the old belt, if still intact.
6
Install the new drive belt by looping it onto the motor shaft with the grooves facing inward.
7
Now loop the belt onto the pulley while rotating the pulley to fully align the belt.
8
Replace the rear panel by inserting the tabs into the slots in the cabinet frame.
9
Secure the panel with the screws.
10
Secure the hoses in the rear panel retainers.
11
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step instructions for replacing the drive belt on Asko washing machines. The most common reason for replacing the belt is when it is broken or not tight on the pulley, causing the washer to not spin or agitate or to make a loud noise whenever the motor is running.
All of the information in this drive belt replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
All of the information in this drive belt replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the drive belt in your washer, first pull the hoses free of the retainers on the rear panel if applicable.
3
Now use a t-20 torx bit to remove the screws securing the panel.
4
Pull the panel off.
5
Rotate the drive pulley as you pull off the old belt, if still intact.
6
Install the new drive belt by looping it onto the motor shaft with the grooves facing inward.
7
Now loop the belt onto the pulley while rotating the pulley to fully align the belt.
8
Replace the rear panel by inserting the tabs into the slots in the cabinet frame.
9
Secure the panel with the screws.
10
Secure the hoses in the rear panel retainers.
11
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com