Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Door Seal Replacement #8081128
Asko Washer Door Seal Replacement #8081128
Skill Level
Total Parts Cost
$47.52Estimated Savings
$112.5002:26
- Description
This video provides step-by-step instructions for replacing the door seal on Asko washing machines. The main reason for replacing the seal is if it is worn or damaged, causing water to leak out of the door during operation.
All of the information in this door seal replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
All of the information in this door seal replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
Step By Step Instructions
1
To replace the door seal on your washer, open the washer door and use a small flathead screwdriver to help pry off the outer door panel from the hinge side.
2
Next, release the door glass from the inner panel.
3
To do this, use a t-20 torx bit to remove the screws and retaining tabs from the top and bottom of the panel as well from the door strike.
4
Loosen the remaining screws and pull out the glass.
5
With the glass removed, you can pull the old door seal off.
6
Install the new door seal by aligning it with the edge of the inner door panel, making sure the notch is positioned next to the door strike.
7
Once aligned, push the seal into place.
8
Reposition the door glass.
9
Replace the retaining tabs and loosely secure them with the screws.
10
With the glass in position, tighten all of the screws.
11
Align the two door panels, snap them together and confirm that the door closes and seals properly.
Description
This video provides step-by-step instructions for replacing the door seal on Asko washing machines. The main reason for replacing the seal is if it is worn or damaged, causing water to leak out of the door during operation.
All of the information in this door seal replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
All of the information in this door seal replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit
Step-By-Step Instructions
1
To replace the door seal on your washer, open the washer door and use a small flathead screwdriver to help pry off the outer door panel from the hinge side.
2
Next, release the door glass from the inner panel.
3
To do this, use a t-20 torx bit to remove the screws and retaining tabs from the top and bottom of the panel as well from the door strike.
4
Loosen the remaining screws and pull out the glass.
5
With the glass removed, you can pull the old door seal off.
6
Install the new door seal by aligning it with the edge of the inner door panel, making sure the notch is positioned next to the door strike.
7
Once aligned, push the seal into place.
8
Reposition the door glass.
9
Replace the retaining tabs and loosely secure them with the screws.
10
With the glass in position, tighten all of the screws.
11
Align the two door panels, snap them together and confirm that the door closes and seals properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com