Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washing Machine Drive Pulley Replacement #8056376
Asko Washing Machine Drive Pulley Replacement #8056376
Skill Level
Total Parts Cost
$73.55Estimated Savings
$112.5002:53
- Description
This video provides step-by-step repair instructions for replacing the drive pulley on an Asko washer. The most common reasons for replacing the drive pulley are when the washer won’t spin, won’t agitate, or makes loud noise.
All of the information for this washer drive pulley replacement video is applicable to the following brands:
Asko
Tools used: multi screwdriver, T20 Torx bit, 16 mm socket and ratchet
All of the information for this washer drive pulley replacement video is applicable to the following brands:
Asko
Tools used: multi screwdriver, T20 Torx bit, 16 mm socket and ratchet
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the drive pulley in your washer, first pull the hoses free of the retainers on the rear panel, if applicable.
3
Now use a t-20 torx bit to remove the screws securing the panel.
4
Pull the panel off.
5
Rotate the drive pulley as you pull off the belt.
6
Using a 16 mm socket, apply a sharp blow to the ratchet to loosen the bolt securing the drive pulley
7
Unthread the bolt and remove the washer then pull the old pulley off of the spline.
8
Install the new drive pulley by first making sure the wave washer is still in place.
9
Now position the pulley on the spline then replace the washer and bolt.
10
Tighten the bolt by applying a sharp blow to the ratchet
11
Replace the drive belt by looping it onto the motor shaft with the grooves facing inward.
12
Now loop the belt onto the pulley while rotating the pulley to fully align the belt.
13
Replace the rear panel by inserting the tabs into the slots in the cabinet frame.
14
Secure the panel with the screws.
15
Secure the hoses in the rear panel retainers.
16
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step repair instructions for replacing the drive pulley on an Asko washer. The most common reasons for replacing the drive pulley are when the washer won’t spin, won’t agitate, or makes loud noise.
All of the information for this washer drive pulley replacement video is applicable to the following brands:
Asko
Tools used: multi screwdriver, T20 Torx bit, 16 mm socket and ratchet
All of the information for this washer drive pulley replacement video is applicable to the following brands:
Asko
Tools used: multi screwdriver, T20 Torx bit, 16 mm socket and ratchet
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the drive pulley in your washer, first pull the hoses free of the retainers on the rear panel, if applicable.
3
Now use a t-20 torx bit to remove the screws securing the panel.
4
Pull the panel off.
5
Rotate the drive pulley as you pull off the belt.
6
Using a 16 mm socket, apply a sharp blow to the ratchet to loosen the bolt securing the drive pulley
7
Unthread the bolt and remove the washer then pull the old pulley off of the spline.
8
Install the new drive pulley by first making sure the wave washer is still in place.
9
Now position the pulley on the spline then replace the washer and bolt.
10
Tighten the bolt by applying a sharp blow to the ratchet
11
Replace the drive belt by looping it onto the motor shaft with the grooves facing inward.
12
Now loop the belt onto the pulley while rotating the pulley to fully align the belt.
13
Replace the rear panel by inserting the tabs into the slots in the cabinet frame.
14
Secure the panel with the screws.
15
Secure the hoses in the rear panel retainers.
16
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com