Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairAsko Washer Pressure Switch Replacement #8089765
Asko Washer Pressure Switch Replacement #8089765
Skill Level
Total Parts Cost
$34.05Estimated Savings
$112.5002:08
- Description
This video provides step-by-step instructions for replacing the pressure switch on Asko washing machines. The most common reasons for replacing the pressure switch are if the washer is overflowing or will not fill, and the air tube to the switch is clear.
All of the information in this pressure switch replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit, flat-head screwdriver
All of the information in this pressure switch replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit, flat-head screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the pressure switch in your washer, first use a t-20 torx bit to remove the screws at the back securing the top panel.
3
Now pull the panel back and lift it up to remove.
4
Lift off the support rail.
5
Disconnect the three pressure switch wire connecters.
6
Now depress the tab on the bottom to release the switch from the support bracket.
7
Use a flathead screwdriver to help detach the air pressure tube from the old switch.
8
Install the new pressure switch by first connecting the air pressure tube.
9
Snap the new switch into position on the support bracket and connect the three wire connecters.
10
Reposition the support rail.
11
Now slide the front edge of the top panel under the control panel.
12
Align the panel with the support rail and the pins on the frame then push down.
13
Replace the screws in the back.
14
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Description
This video provides step-by-step instructions for replacing the pressure switch on Asko washing machines. The most common reasons for replacing the pressure switch are if the washer is overflowing or will not fill, and the air tube to the switch is clear.
All of the information in this pressure switch replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit, flat-head screwdriver
All of the information in this pressure switch replacement video is applicable to the following brands: Asko
Tools used: multi-screwdriver, T20 Torx bit, flat-head screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
To replace the pressure switch in your washer, first use a t-20 torx bit to remove the screws at the back securing the top panel.
3
Now pull the panel back and lift it up to remove.
4
Lift off the support rail.
5
Disconnect the three pressure switch wire connecters.
6
Now depress the tab on the bottom to release the switch from the support bracket.
7
Use a flathead screwdriver to help detach the air pressure tube from the old switch.
8
Install the new pressure switch by first connecting the air pressure tube.
9
Snap the new switch into position on the support bracket and connect the three wire connecters.
10
Reposition the support rail.
11
Now slide the front edge of the top panel under the control panel.
12
Align the panel with the support rail and the pins on the frame then push down.
13
Replace the screws in the back.
14
You’re now ready to plug the power cord back in and confirm that the washer works properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com