Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Dryer Moisture Sensor Replacement #DC61-02627A
Samsung Dryer Moisture Sensor Replacement #DC61-02627A
Skill Level
Total Parts Cost
$15.12Estimated Savings
$112.5002:20
- Description
This video provides step-by-step repair instructions for replacing the moisture sensor on a Samsung dryer. The most common reasons for replacing the moisture sensor are when the dryer takes too long, stops too soon, or won’t stop.
All of the information for this moisture sensor replacement video is applicable to the following brands:
Samsung
Tools needed: multi-screwdriver, Phillips head bit
All of the information for this moisture sensor replacement video is applicable to the following brands:
Samsung
Tools needed: multi-screwdriver, Phillips head bit
Step By Step Instructions
1
As with any repair, be sure to unplug the appliance before beginning.
2
To replace a moisture sensor bar in your dryer, first remove the lint filter.
3
Next, unthread the screws securing the filter housing.
4
Lift out the housing and disconnect the wires from the moisture sensor bars.
5
Use a small flathead screwdriver to help pry out the old sensor bar you’re replacing.
6
Install the new moisture sensor bar by sliding it into position on the filter housing and snap it into place.
7
Return the housing to the dryer and connect the wires to the sensor bars.
8
Hold the filter flap down and reposition the housing.
9
Reinstall the mounting screws.
10
Replace the lint filter.
11
Plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the moisture sensor on a Samsung dryer. The most common reasons for replacing the moisture sensor are when the dryer takes too long, stops too soon, or won’t stop.
All of the information for this moisture sensor replacement video is applicable to the following brands:
Samsung
Tools needed: multi-screwdriver, Phillips head bit
All of the information for this moisture sensor replacement video is applicable to the following brands:
Samsung
Tools needed: multi-screwdriver, Phillips head bit
Step-By-Step Instructions
1
As with any repair, be sure to unplug the appliance before beginning.
2
To replace a moisture sensor bar in your dryer, first remove the lint filter.
3
Next, unthread the screws securing the filter housing.
4
Lift out the housing and disconnect the wires from the moisture sensor bars.
5
Use a small flathead screwdriver to help pry out the old sensor bar you’re replacing.
6
Install the new moisture sensor bar by sliding it into position on the filter housing and snap it into place.
7
Return the housing to the dryer and connect the wires to the sensor bars.
8
Hold the filter flap down and reposition the housing.
9
Reinstall the mounting screws.
10
Replace the lint filter.
11
Plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com