Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRyobi Hedge Hedge Trimmer Intake Manifold Gasket #901551001
Ryobi Hedge Hedge Trimmer Intake Manifold Gasket #901551001
Skill Level
Total Parts Cost
$1.72Estimated Savings
$112.5002:39
- Description
This video provides step-by-step repair instructions for replacing the intake manifold gasket on a Ryobi hedge trimmer. The most common reason for replacing the intake gasket is when it is damaged during a repair and the hedge trimmer won’t start or has trouble starting.
All of the information for this intake manifold gasket replacement video is applicable to the following brands:
Homelite, Ryobi, Green Machine
Tools used: 3/8 socket
All of the information for this intake manifold gasket replacement video is applicable to the following brands:
Homelite, Ryobi, Green Machine
Tools used: 3/8 socket
Step By Step Instructions
1
Before you replace the intake manifold gasket on your hedge trimmer first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now depress the tab to release the air filter cover.
4
Use a 3/8th inch socket to help loosen the mounting nuts securing the air filter and carburetor.
5
Pull off the filter.
6
Note the orientation of the fuel lines attached to the carburetor then detach the fuel lines – be prepared for some fuel to spill out.
7
Open the throttle and use needle-nose pliers to disconnect the throttle cable from the carburetor.
8
You can now slide the carburetor off of the mounting bolts and remove the old intake manifold gasket.
9
Install the new intake manifold gasket by sliding it onto the mounting bolts.
10
Now slide the carburetor back onto the bolts.
11
Connect the throttle cable to the carburetor and attach the fuel lines to the appropriate ports.
12
Replace the air filter and secure the assembly with the mounting nuts.
13
Realign the filter cover and snap it into place.
14
Reattach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the intake manifold gasket on a Ryobi hedge trimmer. The most common reason for replacing the intake gasket is when it is damaged during a repair and the hedge trimmer won’t start or has trouble starting.
All of the information for this intake manifold gasket replacement video is applicable to the following brands:
Homelite, Ryobi, Green Machine
Tools used: 3/8 socket
All of the information for this intake manifold gasket replacement video is applicable to the following brands:
Homelite, Ryobi, Green Machine
Tools used: 3/8 socket
Step-By-Step Instructions
1
Before you replace the intake manifold gasket on your hedge trimmer first make sure the engine has cooled.
2
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Now depress the tab to release the air filter cover.
4
Use a 3/8th inch socket to help loosen the mounting nuts securing the air filter and carburetor.
5
Pull off the filter.
6
Note the orientation of the fuel lines attached to the carburetor then detach the fuel lines – be prepared for some fuel to spill out.
7
Open the throttle and use needle-nose pliers to disconnect the throttle cable from the carburetor.
8
You can now slide the carburetor off of the mounting bolts and remove the old intake manifold gasket.
9
Install the new intake manifold gasket by sliding it onto the mounting bolts.
10
Now slide the carburetor back onto the bolts.
11
Connect the throttle cable to the carburetor and attach the fuel lines to the appropriate ports.
12
Replace the air filter and secure the assembly with the mounting nuts.
13
Realign the filter cover and snap it into place.
14
Reattach the wire and boot to the spark plug and your hedge trimmer should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com