Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRyobi Hedge Trimmer Gas Tank Replacement #308675010
Ryobi Hedge Trimmer Gas Tank Replacement #308675010
Skill Level
Total Parts Cost
$14.74Estimated Savings
$112.5002:01
- Description
This video provides step-by-step instructions for replacing the gas tank on Ryobi hedge trimmers. The most common reason for replacing the tank is if it is cracked or damaged, causing the engine to leak fuel.
All of the information in this gas tank replacement video is applicable to the following brands: Ryobi
Tools used: T25 Torx head screwdriver
All of the information in this gas tank replacement video is applicable to the following brands: Ryobi
Tools used: T25 Torx head screwdriver
Step By Step Instructions
1
Before you replace the gas tank on your hedge trimmer first make sure the engine has cooled and that there is no fuel left in the tank.
2
Next, remove the wire and boot from the spark plug.
3
Now depress the tab to release the air filter cover.
4
Note the orientation of the fuel lines attached to the carburetor then detach the lines – be prepared for some fuel to spill out.
5
Use a t-25 torx bit screwdriver to remove the mounting screws securing the gas tank.
6
Pull the old tank free.
7
Install the new gas tank by aligning it on the engine ..then replace the mounting screws to secure.
8
Attach the new fuel lines to the appropriate ports on the carburetor.
9
Realign the filter cover and snap it into place.
10
Reattach the wire and boot to the spark plug fill the tank with fuel and your hedge trimmer should be ready for use.
Description
This video provides step-by-step instructions for replacing the gas tank on Ryobi hedge trimmers. The most common reason for replacing the tank is if it is cracked or damaged, causing the engine to leak fuel.
All of the information in this gas tank replacement video is applicable to the following brands: Ryobi
Tools used: T25 Torx head screwdriver
All of the information in this gas tank replacement video is applicable to the following brands: Ryobi
Tools used: T25 Torx head screwdriver
Step-By-Step Instructions
1
Before you replace the gas tank on your hedge trimmer first make sure the engine has cooled and that there is no fuel left in the tank.
2
Next, remove the wire and boot from the spark plug.
3
Now depress the tab to release the air filter cover.
4
Note the orientation of the fuel lines attached to the carburetor then detach the lines – be prepared for some fuel to spill out.
5
Use a t-25 torx bit screwdriver to remove the mounting screws securing the gas tank.
6
Pull the old tank free.
7
Install the new gas tank by aligning it on the engine ..then replace the mounting screws to secure.
8
Attach the new fuel lines to the appropriate ports on the carburetor.
9
Realign the filter cover and snap it into place.
10
Reattach the wire and boot to the spark plug fill the tank with fuel and your hedge trimmer should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com